Not a member yet? Register now and get started.

lock and key

Sign in to your account.

Account Login

Forgot your password?

Parts Kit for Beginner’s Guide to Programming the PIC24/dsPIC33

The parts kit provides all the necessary electronic parts to conduct the Microstick II based experiments/exercises detailed in the book. The kit is offered through Nuts and Volts . Details for purchase can be found by  clicking here.

The LCD comes with a protective film that is marked. This can appear as a broken LCD–do not be alarmed. just remove film before use and the line goes away. The kit also comes with a power connector to connect breadboard power +3.3V and GND from Microstick II to your breadboard. its use is optional but makes bread boarding easier since an external power source is not required. The Microstick II power source is label on board as VCC (+3.3V) and GND pads. Place the two pin connector into those pad inserting from top of board. Solder pins in place on bottom on board. Use kit supplied jumper cables to connect power to your breadboard. See pictures below.